Inspection Certification Associates (ICA) School Practice Test

These questions are part of the practice quiz. Start practicing

• What might a home inspector suggest addressing to improve energy efficiency?
• Which inspection method focuses on evaluating past repairs?
• What is the importance of checking for lead paint in homes?
• What is a significant concern regarding older home electrical systems?
• Inspectors are required to offer warranties limited to items inspected.
• Standards of practice define "installed" as meaning:
• Which of the following is NOT an approved water supply material?
• What should be assessed during a driveway inspection?
• Which type of insulation is most commonly used in residential construction?
• What is one of the consequences of neglecting regular chimney inspections?
• A fireplace can share a chimney flue with:
• What is the minimum amount of venting required for a crawl space per 300 square feet of floor area?
• What is the purpose of a home warranty?
• In balloon framing, how are the studs arranged?
• What is a common building code violation inspectors look for?
• What type of gusset plates are used on wood or floor trusses?
• What component in a furnace is responsible for shutting it down for safety?
• How does an inspector evaluate the condition of a home’s exterior?
• Which component is NOT typically included in wood frame wall assemblies?
• What is the proper term for an inspection of a home before purchase?
• What is the main purpose of a sewer line inspection?
• What is the minimum height for electrical receptacles above the floor in a living area?
• What is the purpose of checking the home’s exterior for peeling paint?
• What type of insulation is commonly found in attics?
• What can lead to mold growth in a home?
• What is an ordinary sign of plumbing issues detected during inspection?
• What is considered the worst case situation regarding foundation wall height?
• A draft induction motor is typically found in which appliance?
• Given a #3 copper wire and a 100 amp breaker, what is the service amperage to report?
• Who is typically considered the client in a home inspection?
• Weak airflow on forced-air systems at the registers is caused by all of these except:
• What is the role of a home inspection contingency in a real estate contract?
• What is the function of collar ties in roofing?
• What component of the electrical system should be ensured for safety?
• What is the typical supply water temperature for circulated hot water radiators?
• What is a common sign of mold in a home?
• What does differential cracking in a residential foundation typically indicate?
• Which document outlines the standards of practice for home inspections?
• In building codes, what does "R-value" measure?
• What does a home inspector typically look for in gutters and downspouts?
• In a standard three tab asphalt roof, which area is most likely to show wear first?
• What does the bare cable (no sheathing) at a weatherhead typically indicate?
• What is the term for the structure designed to divert water around a chimney?
• What factor can influence the overall condition of a home?
• A steam radiator system usually operates at what temperature?
• What can be an effect of inadequate ventilation in a home?
• What must be done if there is a significant crack in the foundation?
• What is the value of a final punch list in construction?
• What are the main safety concerns when inspecting a property?
• What does a home inspection report typically include?
• What is the primary purpose of a home inspection?
• What is a common defect found in roofing systems?
• In a solid brick house, what indicates corner settlement?
• When inspecting a roof, what is a crucial aspect to evaluate?
• When inspecting private sidewalks, which condition should an inspector be most concerned about?
• What does bonding in electricity refer to?
• What is the recommended minimum clearance from soil to wood components in buildings?
• The connection device between copper and galvanized piping that prevents corrosion is called a:
• What are the three main components of a stairway?
• Which action is NOT required of a home inspector during an inspection?
• Why are tripping hazards a concern during home inspections?
• What often causes chimney deterioration?
• Why should an inspector check the home’s foundation?
• Where should a vapor barrier be positioned in a building?
• What material is primarily used to prevent water intrusion along roofing edges?
• What is a safety requirement for a water heater or furnace installed in a garage?
• What do inspectors primarily look for when evaluating windows?
• What maintenance issue is most often caused by poor ductwork design?
• How should a home inspector respond to a buyer's real estate agent requesting a copy of the inspection report?
• What is the function of a sump pump?
• What should be done with a water heater that is 27 years old?
• Which part of a plumbing inspection often requires checking for leaks?
• Aluminum branch wiring was used as a substitute for expensive copper wire approximately when?
• What is included in the Standards of Practice for home inspections?
• What should a homeowner do if their home has knob and tube wiring?
• How should a water heater burner be tested for proper operation?
• Inspectors are required to describe wall cladding material.
• What does the acronym HVAC stand for?
• What is an important factor in moss growth on roofs?
• What condition could indicate the presence of termites?
• What is a possible indication of electrical issues during a property inspection?
• What is the material at the top of a parapet wall called?
• During an inspection, what does a 'whirlybird' refer to?
• Which factor is key in determining the safety of electrical systems in a home?
• Why is inspecting the HVAC system critical?
• Which of the following is an indicator of water intrusion?
• What does the term "latent defect" mean?
• In which areas of a home should GFCI outlets be installed?
• Which type of flooring is known for its longevity and ease of cleaning?
• What is the minimum attic venting required in an attic without a vapor barrier per one square foot of free space?
• What is an important factor for inspecting insulation in a home?
• What does the presence of blisters and bubbles on a built-up roof indicate?
• What indicates that a roof is nearing the end of its useful life?
• What is the typical lifespan of a roof?
• What part of an I-Joist is referred to as the bottom?
• What information is critical to gather from a home inspection for future reference?
• What is an essential component of a roof inspection?
• What environmental factor is most important to assess in homes near coastlines?
• What should be inspected in the foundation of a home?
• What is typically evaluated during an exterior inspection of a house?
• What is the minimum clearance required from combustibles for a single wall furnace vent?
• Which of the following is a sign that roofing may need attention?
• What is a proper venting option for a gas dryer?
• Which is NOT a common material for a foundation wall?
• What technique can help assess the condition of a home's exterior walls?
• What does "checking" in a structural wood framing member indicate?
• What is a potential consequence of improper attic ventilation?
• For waste systems to drain effectively, what must be adequately installed?
• What safety feature is required in bedrooms for homes built after 1992?
• Does a home inspection conducted in accordance with the standards of practice uncover every defect in the house?
• How can you determine if a shower door has safety glazing?
• What does the presence of efflorescence on basement walls indicate?
• Why is tempered glass considered safer than ordinary glass?
• What can result from excessive indoor humidity?
• What is the small peaked roof construction on the high side of a chimney called?
• Why must a home inspector assess the driveway during an inspection?
• What common issues do inspectors typically look for in plumbing inspections?
• What is the primary function of the water in a trap?
• What is typically included in a home inspector's report?
• What should be checked regarding exterior paint?
• What is one indication of a potential crack or hole in the heat exchanger?
• What is one common reason for an inspection to fail?
• What is a common issue with windows that may be flagged during an inspection?
• Which of the following is not an indicator of poor window seals during an inspection?
• What could a gas furnace's banging noise indicate?
• What is the importance of grading around a foundation?
• What can prolonged exposure to moisture lead to in a home?
• What might indicate a potential electrical issue during an inspection?
• During a home inspection, what is typically checked alongside the HVAC system?
• Which of the following is a common feature checked in a foundation inspection?
• What is a functional flow test?
• What is the primary purpose of an inspection in real estate?
• Which type of pest inspection might be required during a real estate transaction?
• What is a common characteristic of well-maintained gutters?
• Which building material is often associated with asbestos?
• What is the main purpose of GFCI outlets?
• How can the age of a water heater typically be determined?
• What does the term "deferred maintenance" refer to?
• What factor is crucial when determining the structural integrity of a home?
• What is the role of a home inspector?
• What is the significance of checking the water heater's temperature setting?
• What can cause a home’s insurance rates to rise?
• Which tool is commonly used to measure moisture levels in walls?
• What is the term for an inspection carried out before the purchase of a new home?
• Why should homes near bodies of water be inspected for mold?
• What kind of flooring is sensitive to moisture and may warp?
• How can homebuyers benefit from a home inspection?
• Why are gutters important for a home?
• According to the Standards of Practice, which vents must be observed during an inspection?
• What is a common symptom of poor drainage around a home's foundation?
• What is a plumbing cross-connection?
• What is the objective of conducting a mold inspection?
• Is a brass flexible gas connection considered hazardous?
• What is required when inspecting electrical systems?
• What is the significance of the American Society of Home Inspectors (ASHI)?
• Which of the following should be included in the inspection?
• What is the primary objective of conducting a pre-inspection before selling a home?
• What is a major indication of a failing roof?
• A crack in the bricks at the top of a doorway or window usually indicates what?
• What is the primary purpose of home inspections?
• What is the main function of the heating, ventilation, and air conditioning (HVAC) system?
• Which plumbing pipe is commonly recognized for its durability and resistance to corrosion?
• What is a common sign of a plumbing leak?
• In electrical wiring, what is the normal path for electricity?
• Why is a carbon monoxide detector important in homes?
• What is a common sign of a roof leak during an inspection?
• In what situation is a "pre-listing inspection" most beneficial?
• What is a common sign that indicates poor ventilation in an attic?
• Which part of a home inspection focuses on water intrusion?
• What is one function of a sump pump?
• What is the purpose of a home warranty?
• What is a common sign of water damage in a home?
• What type of damage is indicated by spalling bricks at a home’s corner?
• Why do home inspectors evaluate electrical systems?
• What is the primary purpose of a home inspection?
• How often should homes be inspected for safety hazards?
• What should be inspected on electrical panels during an assessment?
• What does a home inspector typically look for in the attic?
• Which tool is frequently used to measure moisture levels in building materials?
• What are the three main components of an air conditioning system?
• What indicates a failure in the operation of a blower motor in a furnace?
• Romex is another name for which type of cable?
• What does a thermal imaging inspection primarily detect?
• Which of the following is NOT part of the home inspection process?
• What type of tool is commonly recommended for inspecting roofs?
• What is a consequence of not having adequate ventilation in an attic?
• Why is it important to inspect the foundation of a home?
• What is the purpose of using a thermal imaging camera during an inspection?
• Which siding has had extensive problems with moisture and subsequent rotting of the underlying framing?
• What is a significant benefit of obtaining a pre-inspection report?
• What is the space between the ground and the bottom of a home's foundation called?
• Which of the following should not be contained within a concrete floor?
• What can excessive moisture in a crawl space lead to?
• What does thermal bridging refer to?
• Why is it essential to evaluate the surrounding landscape during a home inspection?
• What should be regularly inspected in a home's electrical system?
• During a plumbing inspection, what might indicate a leak?
• Where is safety glass specifically required?
• Why is it important to inspect windows?
• What is an important reason for checking the age of a home’s roof?
• Inspectors are required to move personal items that obstruct visibility.
• What should be included in the inspection report?
• How do the standards of practice benefit home inspectors?
• Which structural component supports the roof and ceiling of a house?
• What building component is typically evaluated for signs of insect damage?
• When testing a GFCI outlet that is not grounded, how will the outlet respond?
• What is usually the first sign of energy loss in a home?
• What is the primary purpose of a radon test?
• What is one of the primary purposes of a home inspector?
• Which of the following statements is true about EIFS siding?
• What should a home inspector look for in attic ventilation?
• Which of the following materials is not commonly used for insulation?
• What is the best method for venting and insulating a cathedral ceiling?
• What is the primary purpose of a pre-purchase home inspection?
• Why is it important to document issues found during a home inspection?
• What does CCST stand for in the context of home inspections?
• A gravity furnace lacks which essential component?
• What aspect of plumbing inspections is crucial for safety?
• What factor is essential for assessing the electrical system during an inspection?
• What is a professional inspector legally required to disclose upon finding major issues?
• What is a common feature to assess when inspecting windows?
• Which gas detection is essential during a home inspection?
• Inspectors are not required to report on which of the following?
• What are the complete combustion by-products of natural gas?
• What is the purpose of checking for GFCI outlets in a home?
• Why is it important to assess drainage systems around a property?
• What material is often used for drainage systems around foundations?
• The presence of three entrance cables providing service to a house indicates what voltage?
• What is a critical requirement for gas piping running in a concrete slab?
• Which of the following roofing materials should last the longest?
• What should an inspector check regarding a home's electrical panel?
• What is one indicator of a pest infestation?
• What is one indicator of structural deficiency?
• What is the primary difference between a home inspection and a home appraisal?
• If something is not readily accessible, how should it be classified?
• What indicates a need for further evaluation of a home's structure?
• What deficiency would typically necessitate the replacement of a forced-air gas furnace?
• What type of roof sheathing is preferred for wood shingles and shakes to allow for quick drying?
• What condition should always be reported as a safety hazard in a gas water heater?
• During an inspection, what indicates that a furnace might not be operating efficiently?
• What does the term "flashings" refer to in roofing?
• Which tool is commonly used to find leaks in roofing?
• When should a home inspector not enter the crawl space?
• What is the primary purpose of inspecting plumbing systems?
• What common sign might suggest a plumbing issue in a home?
• Type B vent is:
• What is the home inspector not required to report?
• What are the main components of a septic system?
• What aspect of house foundations is crucial during an inspection?
• What is the minimum clearance required for residential entrance cables over a driveway?
• All new water heaters are of which type?
• In a heat pump operating in heating mode, what is the expected temperature rise?
• What tool can be used to check for air leaks around doors and windows?
• What issue is commonly associated with aluminum wiring?
• Why is attic insulation checked during a home inspection?
• What could be a common issue found in a crawl space that inspectors look for?
• Which situation could lead to the need for structural repairs in a home?
• Which system is NOT typically inspected during a home inspection?
• How deep must ground rods be driven into the ground?
• What is the function of a sump pump?